User Tools

Site Tools


glossary

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

glossary [2013/02/01 12:16]
2001:470:1f13:bfc:219:7eff:feb2:12af old revision restored (2012/08/23 22:45) SPAM
glossary [2016/01/03 19:54] (current)
didier add some words specific to the TCP profile
Line 2: Line 2:
  
   * AH = [[wp>​Authentication Header]]   * AH = [[wp>​Authentication Header]]
 +  * co_common = a type of ROHC packet defined by the TCP profile for transmitting changes larger than seq_X or rnd_X packet types but smaller than IR or IR-DYN packet types 
   * CSRC = Contributing SouRCe, a field of the RTP header   * CSRC = Contributing SouRCe, a field of the RTP header
   * ESP = [[wp>​Encapsulating Security Payload]]   * ESP = [[wp>​Encapsulating Security Payload]]
Line 22: Line 23:
   * RFC = Request For Comments, a standard defined by the IETF   * RFC = Request For Comments, a standard defined by the IETF
   * R-mode = bidirectional Reliable mode, a [[rohc-protocol#​modes_of_operation|ROHC mode of operation]]   * R-mode = bidirectional Reliable mode, a [[rohc-protocol#​modes_of_operation|ROHC mode of operation]]
 +  * rnd_X = a type of ROHC packet defined by the TCP profile for transmitting changes in streams using IP-ID with random behavior (or not IP-ID), X is an integer in range [1-8]
   * ROHC = [[rohc-protocol|RObust Header Compression]]   * ROHC = [[rohc-protocol|RObust Header Compression]]
   * RTP = [[wp>​Real-time Transport Protocol]]   * RTP = [[wp>​Real-time Transport Protocol]]
   * SDVL = Self-describing variable-length,​ a [[rohc-protocol#​encoding_schemes|ROHC encoding scheme]]   * SDVL = Self-describing variable-length,​ a [[rohc-protocol#​encoding_schemes|ROHC encoding scheme]]
 +  * seq_X = a type of ROHC packet defined by the TCP profile for transmitting changes in streams using IP-ID with sequential or sequential-swapped behavior, X is an integer in range [1-8]
   * SN = Sequence Number, the RTP Sequence Number field or an incremental Sequence Number for non-RTP profiles   * SN = Sequence Number, the RTP Sequence Number field or an incremental Sequence Number for non-RTP profiles
   * SO = Second Order, a [[rohc-protocol#​compressor_decompressor_states|ROHC compressor state]]   * SO = Second Order, a [[rohc-protocol#​compressor_decompressor_states|ROHC compressor state]]
glossary.txt · Last modified: 2016/01/03 19:54 by didier